Steam, water, oil or gas where protection
from foreign matter in a pipeline is required.
CONSTRUCTION
The Keckley Style F-300 & E-300
strainers are constructed from the finest bronze castings
and are machined to exacting specifications.
Solder Joint Ends are in compliance with
ASME B16.18 unless otherwise specified.
FEATURES
The Keckley Style F-300 & E-300
strainers feature a machined seat in the body and cap for
proper alignment and to ensure accurate reseating when
servicing is required. These strainers have a
straight threaded cap and are furnished standard with a NPT
blow-off connection. The gasket is a flat copper gasket that
is compressed between the body and cap for maximum strength
and durability. Keckley Style F-300 & E-300 strainers
can be furnished with a bronze blow-off plug upon request.
Standard perforated brass screens are
spot welded along the seam for maximum strength. Different
size perforations and meshes are available in brass,
stainless steel, and monel to meet specific media
requirements. If media is not indicated, screens for water
will be supplied.
SELF CLEANING
Self cleaning is accomplished by opening
the valve or drain plug connected to the blow-off port. Warning:
See Maintenance Instructions on page S6
of the Strainer Information Section for additional
precautions and detailed information on servicing the
strainer.
Printable Version
