Steam, water, oil or gas where protection
from foreign matter in a pipeline is required.
CONSTRUCTION
The Keckley Style SSB-7 strainers are
constructed from rugged 316 stainless steel castings and are
machined to exacting specifications.
Socket Weld bore is in compliance with
ASME B16.11 unless otherwise specified.
FEATURES
The Keckley Style SSB-7 strainer features
a machined groove in both the body and cap for proper
alignment and to ensure accurate reseating when servicing is
required. This strainer has a straight threaded cap and is
furnished standard with a NPT blow-off connection. The
gasket is 304 stainless steel spiral wound and is compressed
between the body and cap (for maximum strength and
durability) and designed for high pressure and high
temperature service. Keckley Style SSB-7 strainers can be
furnished with a stainless steel blow-off plug upon request.
Standard perforated 304 stainless steel
screens are spot welded along the seam for maximum strength.
Different size perforations and meshes are available in
stainless steel, monel, and brass to meet specific media
requirements. If media is not indicated, screens for steam
will be supplied.
SELF CLEANING
Self cleaning is accomplished by opening
the valve or drain plug connected to the blow-off port. Warning:
See Maintenance Instructions on page S6
of the Strainer Information Section for additional
precautions and detailed information on servicing the
strainer.
Printable Version
