Steam, water, oil or gas where protection from foreign matter
in a pipeline is required.
CONSTRUCTION
The Keckley Style F-150 & E-150 strainers are constructed
from the finest bronze castings and are machined to exacting specifications.
Solder Joint Ends are in compliance with ASME B16.18 unless
otherwise specified.
FEATURES
The Keckley Style F-150 & E-150 strainers feature a
machined seat in the body and cap for proper alignment and to ensure accurate
reseating when servicing is required. These strainers have a straight threaded
cap and are furnished standard with a NPT blow-off connection. The gasket is a
flat fiber gasket that is compressed between the body and cap for maximum
strength and durability. Keckley Style F-150 & E-150 strainers are
furnished with a bronze blow-off plug unless otherwise specified.
Standard screens are 20 mesh 304 stainless steel through size
2". Sizes 2-1/2" and 3" are furnished with 3/64" perforated
304 stainless steel screens. All screens are spot welded for maximum strength.
Different size meshes and perforations are available in stainless steel, monel,
and brass to meet specific media requirements.
SELF CLEANING
Self cleaning is accomplished by opening the valve or drain
plug connected to the blow-off port. Warning: See Maintenance
Instructions on page S6
of the Strainer Information Section for additional precautions and detailed
information on servicing the strainer.
Printable Version
